Home > Mac OS X > Booting an Intel Mac from an APM-partitioned disk.

Booting an Intel Mac from an APM-partitioned disk.

I’ve been able to confirm that it is in fact possible to boot an Intel Mac and a PowerPC Mac from the same external hard drive, something that had been previously held to not be possible. The boot disks for the Intel and PowerPC versions of OS X do need to live on separate partitions, but the Intel partition can be formatted as APM, or Apple Partition Map, instead of the Intel-specific GPT, or GUID Partition Table. This is building on the great work of Jonathan Rentzch at http://rentzsch.com/tidbits/intelbasedMacBootIncompatibility. 
What I did: 
1. Partitioned a large Firewire/USB 2.0 external hard drive on my iMac with two partitions. Both were formatted as GPT, and were identically sized. One was named Intel Boot and the other PowerPC Boot. 
2. Hooked the hard drive up to my test Intel iMac via USB and then booted the Mac off of the 10.4.4 install DVD that came with the iMac. 
3. Installed 10.4.4 on the Intel Boot drive. (I left off the bundled software, so it was just 10.4.4.) 
4. After the installation, I booted off of the external drive via USB 2 and made sure everything was working as expected. At that point, I also ran Software Update to make sure that I was up to date. Software Update found and updated my external drive with 10.4.5. Once the updates were finished, I booted back off the iMac’s internal hard drive. 
5. Once booted from the internal hard drive, I used Disk Utility to make a cloneable image of the Intel Boot drive and saved that onto PowerPC Boot. 
6. I disconnected the external drive from the Intel iMac, then connected it back to my G5 via Firewire. 
7. I copied the Intel clone image from PowerPC Boot onto my G5. I then re-partitioned the drive again on the G5 and re-setup the Intel Boot and the PowerPC Boot partitions as APM-formatted partitions. 
8. I then cloned the Intel clone image onto the Intel Boot partition, and cloned an existing 10.4.3 PowerPC image onto PowerPC Boot. 
9. I booted my G5 off of PowerPC Boot. No problems were seen, so I rebooted back to the internal hard drive. 
10. I then disconnected the external hard drive, connected it via USB 2 to the Intel iMac and then proceeded to boot the Intel iMac off of the external hard drive. There appeared to be no problems.  
11. I then booted back to the internal hard drive, restarted and held down the Option key to bring up the drives that the Mac thinks it can boot off of. The Intel partition showed up and I was able to select and boot off of it again. 
This method obviously relies on building the image on an Intel Mac that has a GPT-formatted partition of sufficient size, but it does at least solve the problem of needing multiple external drives to support both Intel and PowerPC Macs. I used USB 2.0 in my testing mostly because I was testing the iMac’s ability to boot off of USB 2 as well. As far as I am aware, there’s no problem with booting an Intel Mac from FireWire. 
Anybody had similar success? Let me know in the comments. 

Categories: Mac OS X
  1. No comments yet.
  1. No trackbacks yet.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: